 |
|
| Name: | Hand Held Metal Detector |
| Model: | 7100HHMD |
| Description: | Highly Sensitive, detects small metallic objects, Auto set, Large Scanning Area makes detection, FAST, Easy Operation, Almost Maintenance Free. |
| Dimension: | 410mm × 100mm × 45mm (Approx) |
| Body: | ABS Moluded Detection Search Head & Powder Coated Metal Cabinet. |
| Weight: | 500gm (Approx) |
| Detection: | Detects both ferrous and non-ferrous metals. |
| Identifications: | Audio‐Visual (LED) Identifications for POWER ON, DETECTION, LOW BATTERY. |
| Sensitivity: | Easily Detects Small Metal Like a paper pin, Sensitivity Adjustable to avoid common metals like coin, key, chain, watch etc for smooth & fast frisking. |
| Power: | 1.2 × 4 Rechargeable Battery OR Dry Battery. |
| Battery Charger: | External AC 100‐240V~50/60 Hz0.3A. Output 6 VDC. |
| Working Temp: | 10c to +50c 0‐95% H R |
 |
|
| Name: | LED Search Light |
| Model: | XN-8100LSL |
| Operating Environmental Temperature: | 15 C to + 55 C |
| Input: | AC Charging ( AC 220V 50Hz) |
| Operation Time: | Up to 12 hrs (Approx) |
| Weight: | 1130 gms with Battery ( Approx) |
| Battery: | 6V 4.5Ah Rechargeable SMF |
| Battery Recharge Time: | Approx 12hrs. |
| Range: | Up to 700m ( Approx) |
| Features: |
(1) Multiple Operations (2) ASTRONG -SUPER FLASHER (3) Aluminium Reflector (4) 5W LED (5) Rechargeable (6) 6Volt 4.5Ah SMF Battery (7) Adjustable Belt (8) Light Weight |
 |
|
| Name: | Hand Held Search Light |
| Model: | XN-7100HHSL |
| Description: | 25cm L,16.5 cm Front DIA & 13.5cm rear dia (Approx.) |
| Body: | Black Color, 3mm Thick ABS material Body. |
| Input: | Input Voltage 220±10% AC Single Phase 50Cycle. |
| Weight: | 3.5kg( Approx) |
| Power: | High Powered 55W Halogen Lamp. |
| Battery: | 12V 7 Ah maintenance free leak proof sealed battery. |
| Battery Operation Time: | 60 Minutes (±10min) Continuous Operation on Full Charge. |
| Features: |
(1) Rugged, Reliable, Simple to use, portable with adjustable shoulder strap. Toughened glass. (2) In build battery Charger. DIMMER for light Intensity adjustments. Auto Flasher (Time Variable) for Signaling. Membrane Switches For Easy And Smooth Operation. (3) Sound Signal attached to determine Extreme high and low of DIMMER & Auto Flasher. The light restarts at the same DIMMER level at which it was put off during last operation. (4) Regulatory (Timer) Circuit Provided. Tough, Impact & Water resistant body. (5) Selector Switch for operating options for CONTINUOUS; FLASHER And TIMER mode. (6) Master push to ON switch. LED indications for system ON, ADV Low Battery indicator, Low Battery indicator, AC/Dc blown fuse indicator. (7) Provision of Auto Switch ON facility to work as an emergency light; in case of Power failure, when in charging mode. |
